TMT-9000S
The TMT-9000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.
- High thermal recovery & performance.
- 13.56MHz power supply with built-in LCD display.
- Dual switchable soldering ports.
- No calibration or operator training required.
- No additional coil assembly costs.
Showing 1–12 of 298 results
`-
Thermaltronics M8CS150 Conical Sharp 0.4mm (0.016″)
$19.90
You save -
Thermaltronics M8C300 Conical 0.4mm (0.016″)
$19.90
You save -
Thermaltronics M7SB275 Bent Sharp 30deg 0.4mm (0.016″)
$19.90
You save -
Thermaltronics M7CH176 Chisel 30deg 1.78mm (0.07″)
$19.90
You save -
Thermaltronics M8MF375 Micro Fine 0.25mm (0.01″)
$19.90
You save -
Thermaltronics M7CP201 Chisel 30deg 1.80mm (0.07″)
$19.90
You save -
Thermaltronics M7CS150 Conical Sharp 0.4mm (0.016″)
$19.90
You save -
Thermaltronics M7CH175 Chisel 30deg 2.5mm (0.10″)
$19.90
You save -
Thermaltronics M7CH250 Chisel Extra Large 5.0mm (0.20″)
$19.90
You save -
Thermaltronics M8LR400 Bevel 60deg Long Reach 1.0mm (0.04″)
$19.90
You save -
Thermaltronics M8CH176 Chisel 30deg 1.78mm (0.07″)
$19.90
You save -
Thermaltronics M7CP200 Chisel 30deg 2.5mm (0.10″)
$19.90
You save