TMT-9000S
The TMT-9000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.
- High thermal recovery & performance.
- 13.56MHz power supply with built-in LCD display.
- Dual switchable soldering ports.
- No calibration or operator training required.
- No additional coil assembly costs.
Showing 1–12 of 97 results
`-
Thermaltronics M8CS150 Conical Sharp 0.4mm (0.016″)
$17.85 -
Thermaltronics M8C300 Conical 0.4mm (0.016″)
$17.85 -
Thermaltronics M8DS035H Knife 3.50mm (0.138″), Power Plus
$36.00 -
Thermaltronics M8CS155 Conical Sharp 0.5mm (0.02″)
$17.85 -
Thermaltronics M8C300H Conical 0.4mm (0.016″), Power Plus
$19.00 -
Thermaltronics M8B325 Bent Sharp 30deg 0.4mm (0.016″)
$17.85 -
Thermaltronics M8LR400 Bevel 60deg Long Reach 1.0mm (0.04″)
$17.85 -
Thermaltronics M8BV350 Bevel 60deg 1.78mm (0.07″)
$17.85 -
Thermaltronics M80DT004 Desoldering Tip – Inner Diameter 1.10mm (0.04″)
$30.00 -
Thermaltronics M8MF375H Micro Fine 0.25mm (0.01″), Power Plus
$19.00 -
Thermaltronics M8MF375 Micro Fine 0.25mm (0.01″)
$17.85 -
Thermaltronics M8CS152H Conical Sharp 0.5mm (0.02″), Power Plus
$19.00